Homepage Response Structure Radiological monitoring module

Radiological monitoring module

It is designed to provide immediate acquisition of data on nuclear environment in nuclear accident area, which is necessary for primary estimate, analysis, and clarification of nuclear environment at adjacent territories for making or refinement of solutions regarding nature of events aimed at population, staff, and environment protection from effects of ionizing radiation.

Equipment:

  • Air spring suspension
  • Dometic TEC 30 EV diesel generating set with remote start board integrated into armpad of second row seats, generator fuel consumption 2 l/hour
  • Uninterruptible power system equipment (UPS) 3 kVA APC
  • Electric hoist Ramsey Patriot Profile 12000 (12V)
  • Rack 19’ tall 24RU and 650 mm deep on vibration-damping springs with display unit and electric-circuit protection
  • Scanning device for sources search SKANS-570

Communication systems:

  • GSM-900/1800 by channels of CJSC Megafon network
  • Satellite station Inmarsat EXPLORER 727/ TT-3722A Thrane & Thrane with data transfer channel speed up to 432 kbps
  • VHF communications system “Volna 201” with transmission power 1-25 W
  • Wi-Fi/WiMax – wireless local area network Infinet SkyMAN with data-transmission circuit speed up to 54 Mbps
  • GSM/GPRS modems (data transfer speed up to 60 kbps)

Scanning device for sources search SKANS-570:

  • Gamma-radiation detection power range from 0,1 MeV to 3,0 MeV
  • Horizontal scanning angular range from 0 to 360°
  • Emission power range not less than 4
  • Deviation in source azimuth determination must not exceed
  • Sensitivity (Cs-137) which emission input into dosage rate of ambient gamma background does not exceed 2%.
  • Operation mode setting time must not exceed 10 min
  • Power supply 12 V, constant
  • Continuous work time not less than 10 hours